Resistance (foil) strain gauges are about 100 times less sensitive (but sturdier and less prone to drift). Other internal parts are either silica, PTFE (Teflon) of Kel-F.Ģ Much smaller particles trapped between two surfaces can be “detected” due to the much larger deformations they produce on the surrounding surfaces.ģ Values quotes are for semiconductor gauges. Resonant frequency of bimorphs and support (stage): approx 200 Hz.ġ All stainless steel parts of internal surfaces are 316-type non-corrosive, non-magnetic steel.Stiffness of bimorphs: approx 10 4 N/m.Maximum lateral displacement (at maximum voltage): approx ±50 µm (0.1 mm peak-to-peak).Maximum recommended applied voltage (peak to peak): ☑00 V.Mass of stage (with glass support): approx 2 gm.Resonant frequency of stage (with glass support): approx 300 Hz.For example the Dell XPS 1x desktop PCIe bus will not run at a fixed speed. Recommended range of driving frequencies: 10 -6 to 250 Hz. (USB only) Find dedicated USB 2.0 busHigh-bandwidth USB cameras like Clara.Maximum shear rates attainable: 10 5 s -1 in squeeze mode (higher rates attainable in shearing/sliding mode depending on the test fluid).Maximum compressive pressure previously attained (using curved surfaces of radii 0.5 2 mm and a thin layer of hard glue): 0.5 GPa (5,000 atm). Contact Andor Technology or find your local representative using the Andor Contact Map.Sensitivity of measuring normal and adhesion forces: 10 nN.

Check if it can be opened in its native software.

Normal distance resolution: 0.1 nm (1 Å). Camera is disconnected, turned off, its drivers are missing, or it is used by a different program: Andor Solis, Hokawo, NI MAX, PFRemote, PCO Camware, ThorCam, etc.

This is because some properties, for example, of piezo-electric crystals, can depend not only on the temperature, but also on the humidity, time and usage (aging and previous history effects). It is also advisable to recheck some calibrations periodically. The following values are approximate, and should be calibrated for each instrument and attachment before use as described in the Users Manuals. General Specifications of the SFA 2000 and Main Attachments

Andor solis does not detect camera